Roland monoFab SRM-20 Desktop Milling Machine

  • $790.00
    • Ex Tax:$790.00
    • Brands Roland
    • Product Code: monoFab SRM-20 Desktop Milling Machine
    • Available: In Stock
    The Roland monoFab SRM-20 Desktop Milling Machine is completely brand new,authentic,original,box sealed which included all accessories and 2-years warrantied.Specification:MODELSRM-20Cuttable MaterialModeling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC boardX, Y, and Z Operation St..

    The Roland monoFab SRM-20 Desktop Milling Machine is completely brand new,authentic,original,box sealed which included all accessories and 2-years warrantied.


    Specification:


    MODELSRM-20
    Cuttable MaterialModeling Wax, Chemical Wood, Foam, Acrylic, Poly acetate, ABS, PC board
    X, Y, and Z Operation Strokes8 (X) x 6 (Y) x 2.38 (Z) inches,
    203.2 (X) x 152.4 (Y) x 60.5 (Z) mm
    Workpiece table size9.14 (X) x 6.17 (Y) inches,
    232.2 (X) x 156.6 (Y) mm
    Distance From Collet Tip to TableMaximum, 5.15 in
    (130.75mm)
    Loadable Workpiece Weight4.4 lbs (2kg)
    X-, Y-, and Z-Axis Drive SystemStepping motor
    Operating Speed0.24 – 70.87inch/min,
    6 – 1800mm/min
    Software Resolution0.000039 inches/step (RML-1), 0.000039 inches/step (NC code),
    0.01 mm/step (RML-1), 0.001mm/step (NC code)
    Mechanical Resolution0.0000393 inches/step,
    0.000998594 mm/step
    Spindle MotorDC motor Type 380
    Spindle Rotation SpeedAdjustable 3,000 – 7,000 rpm
    Cutting Tool ChuckCollet method
    InterfaceUSB
    Control Command SetsRML-1, NC code
    Power RequirementsMachine: DC24V, 2.5A,
    Dedicated AC adapter: AC 100-240V ±10%, 50/60Hz
    Power ConsumptionApprox. 50W
    Operating NoiseDuring operation: 65 dB (A) or less (when not cutting),
    during standby: 45 dB (A) or less
    External Dimensions17.76 (W) x 16.80 (D) x 16.78 (H) inches,
    451.0 (W) x 426.6 (D) x 426.2 (H) mm
    Weight43.2 lbs, 19.6 kg
    Installation EnvironmentTemperature of 41 to 104 °F (5 to 40°C),
    35 to 80% relative humidity (no condensation)
    Included ItemsUSB cable, AC adapter, Power cord, Cutting tool, Collet, Set
    screw, Spanners (7,10mm / 0.28, 0.39 inches), Hexagonal
    wrench (size 2,3 mm / 0.059, 0.12 inches), Positioning pins,
    Double-sided tape, Start-up page guidance card

    Write a review

    Note: HTML is not translated!
        Bad           Good